ADLINK AMP-208C - Manual (Page 114)

Motion Control Theory 100
AMP-204C / AMP-208C
NOTE NOTE
1. Motion control input signal EMG, ALM,
PEL, and MEL may lead to movement
termination. Please refer to safety
protection related sections.
2. In continuous mode the target position
may be updated from time to time (so
does the command position).
3. When control axis is in jog movement,
other movement commands is disabled
to prevent malfunctions.
4. When the control axis is running other
movements (e.g. home movement) the
jog command will be ignored.