D-Link DCS-6620G - Manual (Page 85)

85
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Changing the Camera Order in the List
You can apply “drag and drop” in the grid area of the camera list to change the sequence of
the connected Internet Cameras, which is shown below. This will enable you to rearrange the
camera order of your choice. Once the camera is moved to a specified location, the proceeding
cameras will then move 1 position up or 1 position down depending on which direction the
selected camera was moved.
Step 1: Step 2:
Press the left mouse button
at the gray index field.
Move the mouse to your new
selected location and release
the mouse button. Then Video
1 will be moved (to the 12th
row in this example).
Once you click the “Save” button in the left-bottom corner of this window, the changes for all
camera configurations will be saved and will validate immediately in the IP surveillance.
NOTE: If you change the remote settings of the Internet cameras in the right webpage of this
window, you need to apply the “
SAVE” button in each corresponding page in order to save
the settings to the cameras. There are different “ SAVE” buttons for changing the settings of
the local IP surveillance system and the remote Video Server/802.11g PTZ Internet Camera
series product respectively.
Monitor Program (continued)