Using and configuring the dcs-6620g with a router – D-Link DCS-6620G User Manual
Page 28
28
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using and Configuring the DCS-6620G with a Router
D-Link’s
DCS-6620G is a versatile and cost effective 802.11g PTZ Internet Camera offering both
video and audio monitoring. It can also serve as a powerful surveillance system in security
applications. The
DCS-6620G can be used with any wired or wireless router. This section explains
how to view the camera from either the Internet or from inside your internal network.
Materials Needed:
• 1 DCS-6620G 802.11g PTZ Internet Camera
• 1 Ethernet Cable
• A Wired or Wireless router such as the D-Link DI-624 Wireless Router
• Ethernet based PC for system configuration
SETTING UP THE DCS-6620G FOR USE BEHIND A ROUTER
Installing a
DCS-6620G 802.11g PTZ Internet Camera on your network is an easy 4–step
procedure:
Assign a local IP Address to your 802.11g PTZ Internet Camera
View the 802.11g PTZ Internet Camera Using Your Internet Explorer Web browser
Access the Router with Your Web browser
Open Virtual Server Ports for Your Router (Enable Remote Viewing)
This section is designed to walk you through the setup process for installing your camera
behind a router and enable remote video viewing. For the basic setup of the
DCS-6620G, follow
the steps outlined in the
Quick Installation Guide.
After you have completed the setup of the
DCS-6620G outlined in the Quick Installation Guide
you will have an operating camera that has an assigned IP Address. Because you are using
a router to share the Internet with one or more PCs, the IP Address assigned to the 802.11g
PTZ Internet Camera will be a local IP Address. This allows viewing within your Local Area
Network (LAN) until the router is configured to allow remote viewing of the camera over the
Internet.
Run the Installation Wizard program from the CD included with the
DCS-6620G. Follow the
steps in the
Quick Installation Guide to configure the DCS-6620G. The camera will be assigned
a local IP Address that allows it to be recognized by the router.
Assign a Local IP Address for Your Camera
Using and Configuring the DCS-6620G with a
Router