D-Link DCS-6620G - Manual (Page 82)

82
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Insert – To insert a remote 802.11g PTZ Internet Camera to the camera list. Click the “Insert”
button, an “Insert New Channel” dialog will popup, as shown below. Specify the IP address,
port, and admin password of the 802.11g PTZ Internet Camera, click the “Ok” button to close
the dialog. Then the system will try to connect to the selected camera. If the connection
succeeds, the camera will be inserted to the camera selection list.
Click Ok
Specify the IP address,
port, and admin password
of the camera.
Once added, you will see the IP address of the camera and also the port that is opened on
the camera (port 80 in this example), so that the images can be viewed from the browser
window.
The selected camera
has been added to
the selection list.
Monitor Program (continued)