D-Link DCS-6620G - Manual (Page 67)

67
DCS-6620G User’s Manual
D-Link Systems, Inc.
Record Snapshots to your FTP server with Motion Detection
1st FTP password: Specify the password to access the external FTP server
(ex. 12345).
1st FTP remote folder: Specify the destination folder in the external FTP server
(ex. snapshot).
Primary FTP passive
mode :
Passive mode will allow access to an external FTP server if
your camera is behind a router protected by a firewall.
2nd FTP server: Specify the Domain name or IP address of your second
external FTP server. This field is optional if you have already
filled in the information for the first FTP server.
2nd FTP user name: Specify the user name to access your backup FTP
server.
2nd FTP password: Specify the user password to your backup FTP server.
2nd FTP remote folder:
Specify the destination folder on your external backup FTP
server.
For detailed information about each setting, please refer to Configuration > Advanced > Network
in the section titled “Using the DCS-6620G With an Internet Browser” (page 34). Click the apply
button when finished.
Secondary FTP passive
mode:
Passive mode will allow access to a second external FTP
server if your camera is behind a router protected by a
firewall.
1st FTP user name:
Specify the user name to access the external FTP server
(ex. John Smith). 3
4
5
6