D-Link DCS-6620G User Manual

Page 55

DCS-6620G User’s Manual

D-Link Systems, Inc.

Using the DCS-6620G with an Internet Browser

Conﬁguration > Advanced > Camera Control (continued)

Current Position:

Enter a name for the position at which you would like to preset
the

DCS-6620G. Click Add to add the new preset position to the

Preset Locations list.

Preset Position:

Using the pull down menu, you can delete a preset position
by selecting it and clicking

Delete.

Dwelling Time:

Set the value of time that the camera will remain on each preset
position before moving to the next. The dwelling time can be
set between 1 and 255 seconds.

Patrol Selection:

To use the Auto Patrol feature, select the desired preset
positions from the

Preset Locations list and add them to the

Selected Locations list by clicking Select

. You can then select

the order in which the camera will patrol through the
preset locations by selecting a location and clicking

DN. Click Remove to remove a location from the list.

Click

Apply

to make

changes effective

Enable IR Control:

Click this to allow the

DCS-6620G to be controlled by the

included remote.

Zoom times display:

Checking this box allows the Administrator to display the zoom
magnitude on the transmitted video.

Save:

The button is valid for “

Pan speed”, “Tilt speed”, “Tilt speed”, “Auto

pan/patrol speed”, “Enable IR control”, “Dwelling time” and “Patrol

selection”. In other words, after changing these settings, and
the “

Save” button is not clicked, the new setting of the camera

will not take effect.