Aiwa NSX-A508 - Manual (Page 8)

I
ooo
i oo
oo
ooo
afo
Aoo
ooo
ooo
■GEQ
■SHIFT
o
SELECTING THE
EQUALIZATION CURVE
P R O G R A M M E D
This unit provides the following 5 different programmed
equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
JAZZ: Accented lower frequencies for jazz-type music
CLASSIC: Enriched sound with heavy bass and fine treble.
LATIN: JAZZ- type equalization curve with higher frequencies
Press GEQ, and turn MULTI JOG to select one of the
programmed equalization curve within 4 seconds.
GRAPHIC EQUALIZER
I
^ RiJiJK
s
“GRAPHIC EQUALIZER” appears (except “GEQ OFF”) and the
GEQ mode is displayed cyclically as follows.
► ROCK—POP—JAZZ —CLASSIC —LATIN—1
'................- Programmed mode -.................
GEQ OFF -<— M4 -— M3 -<— M2 -— M1 —
(cancel) : ^ '
.-------- Manual mode............ '
To display the current GEQ mode
Press GEQ. The current mode is displayed for 4 seconds.
To cancel the selected mode
Press GEQ, and turn MULTI JOG to select” GEQ OFF” within 4
seconds. “GRAPHIC EQUALIZER” disappears.
To select with the remote control
Press GEQ repeatedly while pressing SHIFT. The GEQ mode is
displayed cyclically as above.
To change the spectrum analyzer display
3 patterns of spectrum analyzer display can be shwon.
Press DISP once, and turn MULTI JOG within 4 seconds to select
the desired spectrum analyzer display.
SETTING A NEW EQUALIZATION CURVE
MANUALLY
The equalization curve can be customized to suit your preference.
1 Press LOW.
The lowest level frequency indicator flashes for 4 seconds.
2 Within 4 seconds, turn MULTi JOG to adjust the
ievel of the iowest frequency.
GEQ
DV-^ 'R-:
_______________
3 Press HIGH.
The highest level frequency indicator flashes for 4 seconds.
4 Within 4 seconds, turn MULTI JOG to adjust the
level of the highest frequency.
GEQ QV-^
----------------------------------
The frequency level indicators of between the lowest and the
highest are adjusted accordingly.
MEMORIZING THE NEW EQUALIZATION
CURVES
Up to 4 customized equalization curves can be stored as the
manual modes Ml - M4.
1 Set a new equalization curve with HIGH, LOW and
MULTI JOG.
See “SETTING A NEW EQUALIZATION CURVE MANUALLY”.
The created curve is displayed for 4 seconds.
GEQ OH T
N
2 Within 4 seconds, press ENTER.
“M 1” flashes on the display for 4 seconds.
GEC:!
N
• If this step Is not completed within 4 seconds, press GEQ
first to display “GEQ ON”. Then press ENTER wtihin 4
seconds.
3 Within 4 seconds, turn MULTI JOG to select one
of the manual modes M1 - M4 to store the curve.
4 Within 4 seconds, press ENTER.
The new equalization curve Is stored.
To select the stored equalization curve
Press GEQ, and turn MULTI JOG to select one of the manual
modes Ml - M4 within 4 seconds.
7
ENGLISH