Dubbing a tape manually, Dubbing the whole tape, 1 press tape – Aiwa NSX-A508 User Manual
Page 14: 3 press tape deck 1/2 to select deck 1, 4 press • rec/rec mute to start recording, To stop dubbing, 3 press synchro dubbing to start recording, Dubbing a tape manually dubbing the whole tape, Dubeihg
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DUBBING A TAPE MANUALLY
DUBBING THE WHOLE TAPE
4
2
• Set the tape to the point where recording will start.
• Note that recording will be done on one side of the tape only.
1 Press TAPE.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit.
3 Press TAPE DECK 1/2 to select deck 1.
“TP 1” is displayed.
4 Press • REC/REC MUTE to start recording.
Playing and recording start simultaneously.
To stop dubbing
Press ■.
This function allows you to make exact copies of the original
tape.
• Dubbing does not start from a point halfway in the tape.
• Note that recording will be done on one side of the tape only.
1 Press TAPE.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
on facing out from the unit.
3 Press SYNCHRO DUBBING to start recording.
DUBEIHG
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press ■.
1
3
ENGLISH