beautypg.com

Vocal fader/multiplex functions, 1 connect your microphone to the mic jack, 3 adjust the volume and tone of the source – Aiwa NSX-A508 User Manual

Page 17: To record microphone sound mixed with source sound, Vocal fader, D multiplex, Auto multiplex, Cancel

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

KARAOKE

KARAOKE

VOCAL FADER/MULTIPLEX FUNCTIONS

This unit can use discs or tapes as Karaoke sources.

Use the vocal fader function for ordinary discs or tapes.
Use the multiplex function for multi audio discs or tapes.

Press KARAOKE repeatedly to select the vocal fader or
multiplex function.

Each time

KARAOKE

is pressed, one of these functions is

selected cyclically.

© @ @

,r -©i

i

; —^ H........ UF - -5. ivpx................i...

1

©

■A

i * * /

UF

OFF -s- M................ i■1px <■ .

A microphone (not supplied) can be connected to this unit,
allowing you to sing along to music sources.

Use a microphone with mini plugs (03.5 mm. Vs inch).

1 Connect your microphone to the MIC jack.

MIC 1

2 Press one of function to seiect the source to be

mixed, and play the source.

3 Adjust the volume and tone of the source.

4 Turn the MIC VOLUME control to adjust the

microphone volume.

To record microphone sound mixed with source sound

Follow the procedure for recording from the sound source (see
page 12).

SYNCHRO DUBBING

cannot be used for mixing recording.

When not using the microphone

Set the microphone volume to

MIN

and remove the microphone

from the

MIC

jack.

• If a microphone is held too near the speakers, a howling sound

may be produced. In this case, hold the microphone away

from the speakers, or decrease the microphone volume.

• If sound through the microphone is extremely loud, it may be

distorted, in this case, decrease the microphone volume.

Recommended microphone

The use of unidirectional type microphone is recommended to

prevent howling. Contact your local Aiwa dealer for details.

• The Karaoke functions may not operate correctly with the

following kinds of CDs or tapes.

- Those with monaural sound

- Those recorded with strong echoes
- Those with the vocal part recorded on the right or left side of

the sound width

•While the Karaoke function is on, the sound is output as

monaural.

• When the function is changed, the Karaoke function is canceled.

(9

Z

5

oc

o

o

u

oc

Ul
z

o

<

oc

<

® Vocal Fader

The singer’s voice becomes softer than the accompaniment.

(D Auto Vocal Fader

The singer’s voice becomes softer only while there is audio

input through a microphone.

(D Multiplex

The sound on the left channel is heard from both speakers
and the sound on the right channel is muted.
To hear the sound on the right channel, see below.

@ Auto Multiplex

The sound on the left channel is heard from both speakers,
and the sound on the right channel is muted only while there

is audio input through a microphone.

To hear the sound on the right channel, see below.

®

Cancel

To change the time lag setting in Auto Vocal Fader or

Auto Multiplex function

The muted original singer’s voice can be turned faster to the

normal level.

When Auto Vocal Fader or Auto Multiplex is selected, “A-VF” or
“A-MPX” is displayed for 3 seconds and changes to the selected

function name. After the selected function name is displayed,

keep pressing

KARAOKE

until “FAST” is displayed.

To return to the initial setting, select SLOW.

When the power is turned off, SLOW is restored.

To change the audible channel in Multiplex function

When Multiplex is selected, “MPX -L” is displayed for 3 seconds

and changes to the selected function name. After the selected

function name is displayed, keep pressing

KARAOKE

until “MPX-

R” is displayed.

To return to the initial setting, select MPX-L.
When the power is turned off, MPX-L is restored.

ENGLISH

1

6