beautypg.com

Peratio, Loading discs, To play one disc only, press disc direct play 1-3 – Aiwa NSX-A508 User Manual

Page 10: To check the remaining time, Selecting a track with the remote control, Replacing discs during play, Playing discs, To play all discs in the disc compartment, press, Peratio i, Cd playing

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

CD PLAYING

I

PERATIO

I

■'fl-

LOADING DISCS

Press CD, then press

±

OPEN/CLOSE to open the

disc compartment. Load disc(s) with the iabei side

up.

To ptay one or two discs,

place the discs on tray 1 and 2.

To play three discs,

press

DISC CHANGE

to rotate the trays

after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing

±

OPEN/CLOSE.

Tray number of the

disc to be played Total playing time

/K 49:; V7= Sl'^

To play one disc only, press DISC DIRECT PLAY 1-3.

The selected disc is played once.

To stop play,

press ■.

To pause play,

press

II.

To resume play, press again.

To search for a particular point during playback,

keep

or ►► pressed and release it at the desired point.

To skip to the beginning of a track during playback,

press

◄◄ or ►► repeatedly or turn

MULTI JOG.

To remove discs,

press

A OPEN/CLOSE.

To start play when the power is off (Direct Play Function)

Press

CD.

The power is turned on and play of the loaded disc(s)

begins.
When

±

OPEN/CLOSE

is pressed, the power is also turned on

and the disc compartment is opened.

To check the remaining time

During play, press

EDIT/CHECK

on the remote control while

pressing

SHiFT.

The amount of time remaining until all tracks

finish playing is displayed. To restore the playing time display,

repeat the above.

*

CD EDIT/CHECK on the unit is aiso available instead of EDIT

CHECK on the remote control.

Selecting a track with the remote control

1

Press

DISC DIRECT PLAY 1-3

to select a disc.

2

Press numbered buttons

0-9

and

+10

to select a track.

Example:

To select the 25th track, press +10, +10 and 5.
To select the 10th track, press

+10

and

0.

The selected track starts to play and continues to the end of
that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without

interrupting play.
1 Press

DISC CHANGE.

2

Remove the discs and replace with other discs.

3

Press

±

OPEN/CLOSE

to close the disc compartment.

• When loading an 8-cm (3-inch) disc, put it onto the inner circle

of the tray.

• Do not place more than one compact disc on one disc tray.
• Do not tilt the unit with discs loaded. Doing so may cause

malfunctions.

Total number of tracks

PLAYING DISCS

Load discs.

To play all discs in the disc compartment, press

Play begins with the disc on tray 1.

Number of track being played Elapsed playing time

Hi; li-S

9

ENGLISH