Command to request data – A&D Weighing Indicator AD-4329 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
12.1.3. Command Format
Explanation of Command
□ When performing a command, the received command or replay data is sent back.
□
When the received command can not be performed such as the “busy" state, the
code" I “ is sent back. In this case, insert a delay time. Eiectrical noise may be the
cause of this error.
□
When receiving an undefined command (unknown command), the code "?“ is
sent back.
□
Optional addresses can be appened to a command. The form of address is
"©address" and this address is two figures specified at F-Function
F~H6.
Exam pie: Command is "Display net value". Address is 23.
Sending a command
i
m
I
Terminators
L Command
Sending a command with address
i©i2i3!MlNigRih^l
Terminators
Command
Address number
Unperformed command reply
1 ifaiM
Terminators
^Unperformed command
Unknown command reply
[?H3,.
Terminators
Unknown command
y Space code(20H)
^
Carriage reiurn(ODh)
Line feed(OAh)
12.1.4. Command to Request Data
Request Data
When receiving this command, Display data is sent back immediately.
Template RW
Command ilFwI^v]
Reply rsiTUGlsi .i+loiolll2l3l .ioiTO^
12. RS-232C Interface
Page 46
AD-4329 Weighing Indicator