A&D Weighing Indicator AD-4329 - Manual (Page 31)

F - ! 3
EXT4
The same a s / u
f - / V
The same as F - /и
EXT5
f- 1 5
The same as F - / 0
EXT6
F - ¡ 6
The same as F - ! 0
EXT7
division (v\^e!ghing interval) o1 first range,
factory settings (Initial settings),
second.
Comparator
Item Parameier Description
F - i O
Comparator function
*0 Not used
1 Upper/lower limit comparison. Set F -P 1, too.
г Setpoint comparison
F - c ’ l
Comparator mode.
Condition to compare
data.
*0 All data, always
WhenF-гíJis /,
F - c * / is effective.
i Stable data
p Data exceeding +5d
3 Stable data exceeding +5d
Ч Data exceeding -5d to -fSd
5 Stable data exceeding -5d to -fSd
Standard Serial Output
Item ParaiTieter Description
C_ 30
r Du
Output Data
* 0 Displayed data
1 Gross data
P Net data
3 Tare value
Lj
Gross data / Net data / Tare value
F ~ 3 f
Output mode
*0 Stream mode
1 Auto print mode
P Manual print mode
F - 3 P '
Auto-print condition
* 0 Positive data only
1
1 Positive and negative data
F - 3 3
Delay for continual data
*0 Not used In case of F - 3 / 0 , the
F - 5 3 is ineffective. I Approximately 2 seconds
f^jLj
Baud rate
0 600 bps
1 1200 bps
*p 2400 bps
bps: bit per second.
d: division (weighing interval) of first range.
*: factory settings (Initial settings).
AD-4329 Weighing Indicator Page 29 6. Functions