A&D Weighing Indicator AD-4329 - Manual (Page 23)

Step 6 Specify the weighing range.
MOD^ key......The key to use a single weighing
range and proceed to step 10.
I
key........The key to store a value as dual
range and proceed to step 10.
(From ia$tpaae.C)
Single range Duai range
PREilTAREl key,...The key to store the second range
and proceed to step 7.
Setting Third Range
Step 7 The ^ mark Is displayed at net and gross.
Select a way.
If keeping the current third division, wait for
displaying
Case1
Step 8
ixxxx and proceed to step 8.
The xxxx is the range.
Case 2 if changing the third division, press the lA i key
while displaying I TOT-xxl. The xx is division.
key........The key to select the division.
key....... The key to store the new division
and proceed to steps.
A
MOPg key......The key not to change the division
and proceed to steps.
Specify the range of the third range.
I > I
key........ The key to select a figure,
key...... .The key to select a number.
Step 9 Specify the weighing range.
key.... .The key to use dual weighing
range and proceed to step10.
key....... The key to store the value as
triple range and proceed to
steplO.
( From last page, B)
SteplO ICBL B\ is displayed. Perform zero calibration
and span calibration from step7 at page 15 .
To zero calibration
and span calibration
AD-4329 Weighing Indicator
Page 21 5.3. Weighing Range Function