Cabletron Systems HSIM-A6DP- - Manual (Page 91)

HSIM-A6DP User’s Guide 4-1
CHAPTER 4
LANVIEW LEDs
This chapter describes how to use the LANVIEW LEDs to monitor HSIM
status and diagnose HSIM problems.
Figure 4-1 shows the location of the
LANVIEW LEDs (Transmit, Receive, STS and LNK).
4.1 HSIM-A6DP LEDs
Refer to Table 4-1 and Table 4-2 for a description of HSIM and APIM
LEDs.
Figure 4-1 The HSIM-A6DP
NOTE
The terms flashing, blinking, and solid used in the LED
definition tables of this chapter indicate the following:
Flashing indicates an irregular LED pulse.
Blinking indicates a steady LED pulse.
Solid indicates a steady LED light. No pulsing.
HSIM-A6DP
R R
APIM 1 APIM 2
207789
Receive (RX)
Transmit (TX)
Status (STS)
Link (LNK)