Cabletron Systems HSIM-A6DP- - Manual (Page 86)

Chapter 3: Local Management
3-60 HSIM-A6DP User’s Guide
3.20 THE ADD/DELETE ENTRY SCREEN
To access the Add/Delete Entry screen from the ATM Connection Setup
screen perform the following steps:
1. Use the arrow keys to highlight the ADD/DELETE command at the
bottom of the ATM Connection Setup screen.
2. Press ENTER, the Add/Delete Entry screen, Figure 3-19 , displays.
Figure 3-19 The Add/Delete Entry Screen
3.20.1 Add/Delete Entry Screen Fields
IF (Modifiable)
This field represents the MIB-II interface on which the new PVC will be
created. If multiple PVCs will be created on one MIB-II interface, the
number of the desired interface should be entered in this field. If a new
MIB-II interface will be used for the new PVC this field can be left at “0”.
The HSIM-A6DP will automatically use the next available interface for
this PVC.
INTERFACE 25 ATM Add/Delete Entry
Device Name:6E132-25
Slot Number: X Flash Image Revision: XX.XX.XX
BOOTPROM Revision:XX.XX.XX
RETURN
IF VPI VCI AAL Type Encapsulation Type BW (Mbps)
0 0 0 [ 5 ] VC Mux 802.3 Bridged 1
ADD/MODIFY EXIT
6E132-25 LOCAL MANAGEMENT
Total Bandwidth On Interface: 155 Total Bandwidth Allocated: 125