Cabletron Systems HSIM-A6DP- - Manual (Page 24)

Chapter 2: Installation
2-6 HSIM-A6DP User’s Guide
Figure 2-4 Installing the HSIM-A6DP
7. Place the HSIM behind the module faceplate. See Figure 2-4 .
8. Insert the connector of the HSIM into the HSIM connector pins on the
module.
9. Press down firmly on the back of the HSIM until the pins slide all the
way into the connector holes.
10. Secure the HSIM to the faceplate using the two screws saved in Step 5 .
Standoff Screws
Faceplate Mounting Screws
207736
HSIM Connector
Standoffs
APIM 1
APIM 2 Pins