Cabletron Systems HSIM-A6DP- - Manual (Page 82)

Chapter 3: Local Management
3-56 HSIM-A6DP User’s Guide
Figure 3-17 The Bandwidth Allocation Mode Warning Screen
7. Use the arrows keys to highlight the YES command at the bottom of
the screen.
8. Press ENTER, the Bandwidth Allocation Mode becomes operational,
and all previously configured LECs, PVCs, and SVCs are deleted.
!
CAUTION
Do not perform the following steps unless the Bandwidth
Allocation Mode Warning screen is fully understood. ALL LAN
Emulation Clients (LECs) and Permanent Virtual Channels
(PVCs) configured on the HSIM-A6DP will be lost.
With Bandwidth Allocation Mode on, the HSIM-A6DP DOES
NOT support Switched Virtual Channels (SVCs).
ATM Connections Screens
Device Name:6E132-25
Slot Number: X Flash Image Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
NO
6E132-25 LOCAL MANAGEMENT
YES
WARNING!
YOU HAVE ELECTED TO ENABLE BANDWIDTH ALLOCATION
MODE. THIS WILL DELETE ALL LECs AND PVCs
CURRENTLY CONFIGURED ON THIS DEVICE. UNI AND
ILMI WILL BE DISABLED.
ARE YOU SURE YOU WANT TO ENABLE BW ALLOCATION MODE?