Cabletron Systems HSIM-A6DP- - Manual (Page 16)

Chapter 1: Introduction
1-4 HSIM-A6DP User’s Guide
1.5 SPECIFICATIONS
This section describes environment specifications and safety requirements
for the HSIM-A6DP. Cabletron Systems reserves the right to change these
specifications at any time without notice.
Environment
Operating Temperature: 5
°
C to 40
°
C (41
°
F to 104
°
F)
Storage Temperature: -30
°
C to 73
°
C (-22
°
F to 164
°
F)
Operating Relative Humidity: 5% to 90% (non-condensing)
Regulatory Compliance
Safety: UL 1950, CSA C22.2 No. 950,
EN 60950, IEC 950, and 73/23/EEC
Electromagnetic
Compatibility (EMC):
FCC Part 15, VCCI V-3, EN 55022,
CSA C108.8, EN 50082-1, 89/336/EEC,
AS/NZS 3548
1.6 RELATED MANUALS
Use the following manuals to supplement the procedures and other
technical data provided in this manual.
Cabletron Systems ATM Technology Guide
Cabletron Systems Cabling Guide
The manuals referenced above can be obtained on the World Wide Web in
Adobe Acrobat Portable Document Format (PDF) at the following site:
http://www.cabletron.com/
NOTE
The documentation for the interface module or standalone hub
in which the HSIM-A6DP will be installed will also assist you in
the installation and setup of the HSIM-A6DP.