Cabletron Systems HSIM-A6DP- - Manual (Page 33)

The ATM Connections Screen
HSIM-A6DP User’s Guide 3-7
DISCOVERY ELAN SETUP
This menu item opens the Discovery ELAN Setup screen. This screen is
used to enable or disable the default ELAN that is created when the
HSIM-A6DP first is initialized in SecureFast mode. This screen also
allows the user to enable or disable any additional discovery ELANs (up
to 16) that the HSIM-A6DP will belong to on the SecureFast network.
3.5 THE ATM CONNECTIONS SCREEN
To access the ATM Connections screen from the ATM screen, perform the
following steps:
1. Use the arrow keys to highlight the CONNECTIONS menu item of
the HSIM-A6DP ATM screen.
2. Press ENTER; the ATM Connections screen, Figure 3-3 , displays.
Figure 3-3 The ATM Connections Screen
NOTE
The DISCOVERY ELAN SETUP menu item will display only if
the host device has been set to operate as a SecureFast
switch. Refer to the Local Management chapter of the host
device for instructions on configuring the host device for this
type of operation.
ATM Connections Screens
Device Name:6E132-25
Slot Number: X Flash Image Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
RETURN
6E132-25 LOCAL MANAGEMENT
CONNECTION TABLE
Bandwidth Allocation Mode: [ OFF ]
EXIT SAVE