Cabletron Systems HSIM-A6DP- - Manual (Page 54)

Chapter 3: Local Management
3-28 HSIM-A6DP User’s Guide
3.11.1 LEC Administration Screen Fields
The LEC Administration screen allows the user to add/modify or delete
LAN Emulation Clients (LECs). New LECs can be configured by the
user, or this function can be performed automatically by the HSIM-A6DP.
The following list explains each of the LEC Administration screen fields
and commands:
LEC Index (Modifiable)
This field is used to identify this LEC in the ATM Forum’s LEC MIB.
This value is provided dynamically and is not modifiable by the user
while in CREATE MODE. This field is used to enter the index of the LEC
that will be changed while in MODIFY MODE.
LEC Status (Read-Only)
This field displays the current status of this LEC. This field displays
[active] or [notInService]. For instructions on changing the LEC status
refer to
Section 3.11.2 .
Configure LEC (Toggle)
This field allows the user to choose to either configure this LEC manually,
or to have the LEC configured automatically. This field toggles between
[Automatic] and [Manual]. For instructions on how to configure the LEC
automatically and manually refer to
Section 3.11.3 and Section 3.11.4 .
ELAN Name (Modifiable)
This field is used to provide a user-defined ELAN for this LEC to join.
This field is modifiable when the LEC is configured in both automatic and
manual mode.
MAX MTU Size (Toggle)
This field is used to define the Max MTU size that this LEC allows to be
used. This field toggles between [1516] and [unspecified], with [1516]
being the default value.
NOTE
If the LEC is configured automatically the MAX MTU Size is a
read-only field.