Cabletron Systems HSIM-A6DP- - Manual (Page 32)

Chapter 3: Local Management
3-6 HSIM-A6DP User’s Guide
3.4 THE HSIM-A6DP ATM SCREEN
The HSIM-A6DP ATM screen displays four menu items for configuration
and monitoring of the HSIM-A6DP. The following list explains each of
the HSIM-A6DP ATM screen fields:
CONNECTIONS
This menu item allows the user to view the current configured virtual
connections (PVCs and SVCs) of the HSIM-A6DP. The ATM
Connections screen also provides access to the Add/Delete Entry screen,
which is used to add, modify, or delete PVCs. It also allows the user to set
the Bandwidth Allocation Mode to on or off.
APIM REDUNDANCY
This menu item displays the ATM Redundancy Configuration screen.
This is screen is used to set which APIM installed in the HSIM-A6DP is
the primary port, to set how the redundant port is activated, when the
primary port is reverted to active status, to set the time when the
HSIM-A6DP tests the redundancy of the APIMs, and to view the results
of these tests.
LAN EMULATION CLIENTS
This menu item displays the ATM LEC screen. This screen contains
multiple options for performing tasks related to the creation and
maintenance of LAN Emulation Clients (LECs).
SIGNALLING
This menu item opens the Signalling screen. This screen allows the user
to view the current version of User-Network Interface (UNI) being used
by the HSIM-A6DP, the current state of the Interim Local Management
Interface (ILMI) and provides the options of restarting UNI and the ILMI.