Cabletron Systems HSIM-A6DP- - Manual (Page 73)

The Signalling Screen
HSIM-A6DP User’s Guide 3-47
3. Use the arrow keys to highlight the UNI Version field.
4. Press the SPACE bar to toggle between the options until the desired
version of UNI displays.
5. Use the arrow keys to highlight the SAVE command located at the
bottom of the screen and press ENTER. The changes are saved to
memory.
3.15.3 Disabling the ILMI Status
To change the ILMI status from the default state of [Auto Configure
Enabled] perform the following steps:
1. Use the arrow keys to highlight the ILMI Status field.
2. Press the SPACE bar until the option [disabled] displays.
3. Use the arrow keys to highlight the SAVE command located at the
bottom of the screen and press ENTER. The ILMI has been disabled.
NOTE
In [Enabled] mode, the user is allowed to force the
HSIM-A6DP to use a desired version of UNI, rather than having
the HSIM-A6DP use the version of UNI that the ATM switch to
which it is connected is currently using.
!
CAUTION
Before completing the following step, ensure that this caution is
fully understood. By disabling the ILMI, ALL SVCs currently
configured on the HSIM-A6DP will be lost.