Cabletron Systems HSIM-A6DP- - Manual (Page 27)

HSIM-A6DP User’s Guide 3-1
CHAPTER 3
LOCAL MANAGEMENT
This chapter explains how to view current ATM connections, configure
Permanent Virtual Channels (PVCs), configure LAN Emulation Clients
(LECs), view Emulated LAN (ELAN) properties, perform searches of the
HSIM-A6DP LEC ARP Cache, configure bandwidth allocation for PVCs,
configure the APIMs installed in the HSIM-A6DP for redundancy, and
configure operating parameters for Switched Virtual Channels (SVCs)
and LAN Emulation using Local Management.
The following must be completed before configuring the HSIM-A6DP
through Local Management:
• Installation of an APIM in the HSIM-A6DP
• Installation of the HSIM-A6DP in the host interface module or
standalone hub with the host device up and running
• Configuration and proper connection of a Local Management terminal
to the host interface module or standalone hub in which the
HSIM-A6DP resides
NOTE
When installed, the HSIM-A6DP provides additional Local
Management features. These features are accessed by
entering Local Management of the host interface module or
standalone hub. Refer to the host device User’s Guide to
establish a Local Management connection.