Cabletron Systems HSIM-A6DP- User Manual
Page 61
The ELAN Properties Screen
HSIM-A6DP User’s Guide
3-35
LEC ID (Read-Only)
The LEC ID displays the LAN Emulation Client Identifier assigned to
this LEC by the LAN Emulation Server when the LEC was created. If the
LEC ID field reads “0” it signifies that this LEC is not a member of an
emulated LAN, and is not connected to a LAN Emulation Server.
Actual ELAN Name (Read-Only)
This field displays the name of the ELAN to which this LEC belongs.
LEC State (Read-Only)
This field displays the current state that the LEC is in. The possible states
are as follows:
•
initialState
•
lecsConnect
•
configure
•
join
•
initialRegistration
•
busConnect
•
operational
Status (Read-Only)
This field displays the current status of the LEC. This field displays either
“active” or “notinservice”.
LANE Version (Read-Only)
This field displays the current version of LAN Emulation being used. This
field reads [1.0] only.
LEC ATM ADDR (Read-Only)
This field displays the ATM Address of the LEC.
NOTE
, provides
definitions for the possible states of the LEC State field.