Cabletron Systems HSIM-A6DP- - Manual (Page 57)

The LEC Administration Screen
HSIM-A6DP User’s Guide 3-31
5. Use the arrow keys to highlight the LECS ATM Address field. Enter
the ATM Address of the LECS. This step is optional, and should be
performed only when a specific LECS, out of multiple servers, is
desired for this LEC.
6. Use the arrow keys to highlight the ADD LEC command at the bottom
of the screen and press ENTER. The LEC will now be configured
automatically by the HSIM-A6DP.
3.11.4 Configuring the LEC Manually (CREATE MODE
Only)
To configure the LEC manually, perform the following steps:
1. Ensure the LEC Administration screen is in CREATE MODE. If the
screen does not display “CREATE MODE”, perform the following
substeps:
a. Use the arrow keys to highlight the RETURN command at the
bottom of the screen.
b. From the ATM LEC screen, use the arrow keys to highlight the
LEC ADMINISTRATION menu item.
c. Press ENTER. The LEC Administration screen, in CREATE
MODE, displays.
2. Use the arrow keys to highlight the Configure LEC field.
3. Use the SPACE bar to toggle between the options until [Manual]
displays.
4. Use the arrow keys to highlight the ELAN Name field. Enter a name
for the LEC that is no more than 32 characters in length.
5. Use the arrow keys to highlight the MAX MTU Size field.
6. Use the SPACE bar to toggle between the options until the desired
MTU size displays.
7. Use the arrow keys to highlight the LES ATM Address field.