Husqvarna 1000-14 - Manual (Page 55)

Eng
Maintenance schedule
Maintenance Service interval
Daily 25 h 50 h 100 h 200 h 300 h
Brake Check •
Brake Adjust •
Safety system Check •
Engine oil Check •
Engine oil * Change •
Oil filter Change •
Cutting unit, disconnector •
V-belts •
Cutting unit •
Hydrostatic oil Check
top up *** •
Blades, bolts Check •
Joints & shafts Lubricate •
Steering wires Check •
Tyre pressure 60 kPa Check •
Air filter (plastic foam) ** Clean •
Air filter (paper) ** Clean •
Air filter (paper)" Change •
Cooling flanges ** engine and
transmission Clean •
Nuts & bolts Check •
Fuel & oil leaks Check •
Battery Check •
Air inlet, engine Check •
Air inlet, hydrostatic transm. •
Fuel valve Clean •
Spark plug Check •
Fuel filter Change •
Valve tolerance Check •
Valves & seats Check •
First change after 8 hours.
* During dusty conditions cleaning and changes to be made often.
** See chapter 5 "Maintenance" for oil quality.
53