Husqvarna 1030 BioClip User Manual
Husqvarna Gardening equipment
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This manual is related to the following products:
Table of contents
Document Outline
- Rider 1030 BioCUp Rider 1200
- Safe operation practices for ride-on mowers
- III. Children
- IV. Service
- General use:
- Driving on siopes
- Children
- Maintenance
- Presentation
- Location of the controls
- Throttle control
- Choke lever
- Speed limiter
- Lift lever for cutting unit
- Lever for adjustment of the cutting height
- Parking brake
- Seat
- Fueiiing
- Before starting
- Starting the engine
- Driving the machine
- Cutting tips
- Stopping the engine
- Disengage iever
- Maintenance schedule
- Dismantling of the machine hoods
- Check the engine’s oil level
- Check the engine’s cooling air intake
- Checking of the fuel pump’s air filter
- Check the transmission’s air intake
- Check the transmission’s oii ievei
- Checking and adjustment of the steering wires
- Checking and adjusting the brake
- Check the level of the battery acid
- Check the safety system
- Replacing the air filter
- Checking and adjustment of the cutting unit’s ground pressure
- Checking and adjusting the cutting unit’s parallelism
- Dismantling the cutting unit
- Checking the blades
- Changing the oil
- Replacement of the oil filter
- Lubrication
- General lubrication
- Checking and adjustment of the throttle wire
- Checking the tyre pressure
- Replacement of the fuel filter
- Winter storage
- Service