Cabletron Systems 2M46 - Manual (Page 24)

Chapter 1: Changes to Local Management Screens
1-8 Local Management Supplement
1.4 SYSTEM RESOURCES INFORMATION SCREEN
The System Resources Information screen, Figure 1-5 , provides
information concerning the processor used in the SmartSwitch and the
amount of FLASH memory, DRAM, and NVRAM that is installed and
how much of that memory is available. This screen is used to monitor the
current switch utilization and the peak switch utilization.
To access the System Resources Information screen from the Device
Configuration Menu screen, use the arrow keys to highlight the
SYSTEM
RESOURCES INFORMATION menu item and press ENTER. The
System Resources Information screen displays.
Figure 1-5 System Resources Information Screen
The following briefly defines each field of the System Resources
Information screen.
CPU Type (Read-Only)
Indicates the microprocessor used in the SmartSwitch.
Flash Memory Installed (Read-Only)
Indicates the amount of FLASH memory installed in the SmartSwitch and
how much is currently available.
2762-23
Flash Memory Installed: 4 MB
DRAM Installed: 20 MB
NVRAM Installed: XX KB
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
CPU Type: i960 HX 66 Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
SAVE
RETURN
RETURN EXIT