beautypg.com

1 setting a mode, port-by-port, Setting a mode, port-by-port -8 – Cabletron Systems 2M46 User Manual

Page 106

background image

Chapter 4: Generic Attribute Registration Protocol (GARP)

4-8

Local Management Supplement

Mode (Selectable)

Select one of the following four modes of operation:

Use GMRP Filter Unreg – Do not forward multicast addressed
frames out this port that have an unregistered multicast address.

Forward All Groups Regardless of multicast address registration,
send all multicast addressed frames out this port.

Filter All Groups – Regardless of multicast address registration, do
not send any multicast addressed frames out his port

Use GMRP Forward Unreg – Forward all multicast addressed
frames out this port that have an unregistered multicast address.

The default setting for this field is “Use GMRP Filter Unreg”.

For details on selecting a mode, refer to

Section 4.4.1

.

Set All Ports (Selectable)

This field enables all ports to be set to one mode simultaneously. The
selection is the same as shown for the Mode field.

4.4.1

Setting a Mode, Port-by-Port

To set the Mode of operation for a particular port, proceed as follows:

1.

Use the arrow keys to highlight the Mode field of a particular port.

2.

Press the SPACE bar to select one of the following modes of
operation:

Use GMRP Filter Unreg

Forward All Groups

Filter All Groups

Use GMRP Forward Unreg

3.

Repeat steps 1 and 2 as necessary to select the mode for other ports.

4.

Use the arrow keys to highlight the SAVE command at the bottom of
the screen.

5.

Press ENTER. The message “SAVED OK” displays and all modes
selected are saved.

This manual is related to the following products: