Sears 113.298141 - Manual (Page 6)

UNPACKING AND CHECKING CONTENTS
Model 113,298141 Table Saw is shipped complete in one
carton but DOES NOT INCLUDE Table Extension, Steel
Legs, or motor. :
Model 113.298031 Table Saw is shipped complete in one
carton but INCLUDES Two Table Extensions, Steel Legs,
and Motor.
Model 113.298151 Table Saw is shipped complete in one
carton but INCLUDES One Table Extension, Steel Legs,
and Motor.
Separate all parts from packing materials and check each
one with the illustration and the list
of Loose Parts to make
certain all items are accounted for, before discarding any
packing material. , ;
If any parts are missing, do not attempt to assemble the
table saw, plug in the; power cord or turn the switch On
until the missing parts are obtained and aré installed
correctly.
Remove the, protective oil that is applied to the table top
and edges of the table. Use any ordinary household type
grease and spot remover.
CAUTION: Never use gasoline, naptha or similar highly
volatile solvents.
Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean, dry cloth.
WARN!NG; FOR YOUR OWN SAFETY, NEVER
CONNECT PLUG TO POWER SOURCE OUTLET UNTIL
ALL ASSEMBLY STEPS ARE COMPLETE. AND YOU
HAVE READ AND UNDERSTAND THE SAFETY AND
OPERATIONAL INSTRUCTIONS.
COMBINATION SQUARE MUST BE TRUE.
STRAIGHT EDGE OF BOARD
3/1" THICK. THIS EDGE MUST
SHOULD BE KIQ OAP OR dVERLAP
HERE-WHEN square IS FLIPPED
OVER IN DOTTED POSITION.
LIST OF LOOSE PARTS
Item Part Name üty.
A
B
c
D
E ■
F
G
H
J
K
L
N
0
P
Q
R
S
T
u
V
w
w
w
X
Y
Y
Y
Y
y
Blade Guard and Spreader ............................... 1
Rip Fence ........................................................................ .. 1
Owners Manual ............................................................. .... 1
Miter Gauge____ ________________— . . . . . 1
Arbor Nut Wrench* _________... ..................................... T
Switch w j Key.................................... ....... ................ . . . . . 1
Rip Fence Guide Bar with Rip Scale (Front) . . . . 1
Handwheel .......................................................................... 2
V-Belt r/2 in. X 4:1 in.*..... .............................. ................. 1
Pulley, 2-1/2 in. dia., with 5/8 in. bore* ........... .. 1
Belt and Pulley Guard ............................... ........ 1
Beit Guard Clip .............. ...... ......... .................... 3
SeiTThreading Screw, 10-32 x 1/2 in. long ..
Belt Guard Support . . . . . . , , . . . . . . . . . . . .
Belt Guard Support Bracket ... J.......................
Motor Base , . , . . . . . . . . . i.....................................
Spreader Rod* ...... ............................. ................... ..
Blade Guard Support with Screw* . . . . . . . .
Spreader Support* ............................... ......................
Rip Fence Guide Bar {Rear) ......... ......... ................ ..
Rip Fence Guide Bar Rod ..........................................
*Pkg, of Miscelianeous Small Parts No. 62751
Consisting of the Following:
Setscrew Wrench, 3/32 in. . . . . . . . . . ' . . . .
Setscrew Wrench, 1/8 in. . . . , , . . . . . . . . .
Setscrew Wrench. 5/32 in. . . . . . . . . . . . . .
Self-Threading Nut . . . . . . . . . . . . . . --------------------
Hex Head Screw, 5/16-18x1-3/4 in. Jong
Hex Head Screw, 5/16—18 x 5/8 in. long .
Hex Head Screw, 5/16—18 x i in. long
Hex Head Screw, 1/4-20 X 5/8 in. long ..................... 2
Hex Head Screw, 5/16-18 x 3/4in. long . , . . . . 1
*These parts are packaged iH Loose Parts Bag No. 62750
AD
AF
F ( O
¡LENGTH ^
AG