Winco DSE71xx Series - Manual (Page 55)

DSE Model 71xx Series Control & Instrumentation System Mk2 Operators Manual
Part No. 057-113 71xx Series OPERATING MANUAL ISSUE 2 12/08/2010 ADM 55
11.1.2 DSE7120
7120 terminal designation Plug description Part No.
1-11 11 way 5.08mm 007-451
15-18 4 way 5.08mm 007-444
22-27 6 way 5.08mm 007-446
39-46 8 way 7.62mm 007-454
47-50 4 way 7.62mm 007-171
51-55 5 way 5.08mm 007-445
60-63 4 way 5.08mm 007-444
NOTE:- Terminals 12-14 are not fitted to DSE7120 controller.
NOTE:- Terminals 19-21 are not fitted to DSE7120 controller.
NOTE:- Terminals 28-38 are not fitted to DSE7120 controller.
NOTE:- Terminals 66-69 are not fitted to DSE7110 controller.
11.2 PURCHASING ADDITIONAL FIXING CLIPS FROM DSE
Item Description Part No.
71xx series fixing clips (packet of 4) 020-294
11.3 PURCHASING SEALING GASKET FROM DSE
The optional sealing gasket is not supplied with the controller but can be purchased separately.
Item Description Part No.
71xx series silicon sealing gasket 020-313