Winco DSE71xx Series - Manual (Page 46)

DSE Model 71xx Series Control & Instrumentation System Mk2 Operators Manual
46 Part No. 057-113 71xx Series OPERATING MANUAL ISSUE 2 12/08/2010 ADM
933 Alt config - Mains over frequency enable On (1), Off (0) X X
934 Alt config - Mains over frequency return 0.0 Hz X X
935 Alt config - Mains over frequency trip 0.0 Hz X X
936 Alt config - Alternative Under speed shutdown enable On (1), Off (0)
937 Alt config - Alternative Under speed shutdown trip 0000 rpm
938 Alt config - Alternative Over speed shutdown trip 0000 rpm
CONFIGURATION PARAMETERS – FLEXIBLE SENSOR (PAGE 10) 7110 7120
MPU CAN MPU CAN
1001
Flexible sensor alarm arming
0 (Arming)
1002
Flexible sensor - Low alarm enable 0 (Arming)
1003
Flexible sensor - Low alarm trip (units depend upon
sensor type) 0 %
0.00 bar
0 °C
1004
Flexible sensor - High alarm enable 0 %
0.00 bar
0 °C
1005
Flexible sensor - High alarm trip (units depend upon
sensor type) 0 (Action)
1006
Flexible sensor - Low warning enable 0 %
0.00 bar
0 °C
1007
Flexible sensor - Low warning trip (units depend
upon sensor type) On (1), Off (0)
1008
Flexible sensor – High warning enable 0 %
0.00 bar
0 °C
1009
Flexible sensor – High warning trip (units depend
upon sensor type) On (1), Off (0)
Flexible sensor type selection
0 None
1 Digital input
2 Percentage sensor
3 Pressure sensor
4 Temperature sensor
CONFIGURATION PARAMETERS – SCHEDULER (PAGE 11) 7110 7120
MPU CAN MPU CAN
1101 Enable scheduler On (1), Off (0)
1102 On or off load On (1), Off (0)
1103 Start time 0:00:00
1104 Day 0 (Day, 0=Monday)
1105 Duration 0:00:00
CONFIGURATION PARAMETERS – TIME (PAGE 12) 7110 7120
MPU CAN MPU CAN