Winco DSE71xx Series - Manual (Page 43)

DSE Model 71xx Series Control & Instrumentation System Mk2 Operators Manual
Part No. 057-113 71xx Series OPERATING MANUAL ISSUE 2 12/08/2010 ADM 43
CONFIGURATION PARAMETERS – MAINS (Page 7) 7110 7120
MPU CAN MPU CAN
701 AC system 0 (AC system) X X
702 Mains failure detection On (1), Off (0) X X
703 Immediate mains dropout On (1), Off (0) X X
704 Mains under voltage enable On (1), Off (0 X X
705 Mains under voltage trip level 0 V 00 X X
706 Mains under voltage return 0 V X X
707 Mains over voltage enable On (1), Off (0 X X
708 Mains over voltage return 0 V X X
709 Mains over Voltage trip level 0 V X X
710 Mains under frequency trip enable On (1), Off (0) X X
711 Mains under frequency trip level 0.0 Hz X X
712 Mains under frequency return 0.0 Hz X X
713 Mains over frequency trip enable On (1), Off (0) X X
714 Mains over frequency return 0 Hz X X
715 Mains over frequency trip level 0.0 Hz X X
Generator and Mains AC System
0 2 Phase 3 wire (L1-L2)
1 2 Phase 3 wire (L1-L3)
2 3 Phase 3 wire
3 3 Phase 4 wire
4 3 Phase 4 wire delta
5 Single Phase 2 wire