Winco DSE71xx Series - Manual (Page 54)

DSE Model 71xx Series Control & Instrumentation System Mk2 Operators Manual
54 Part No. 057-113 71xx Series OPERATING MANUAL ISSUE 2 12/08/2010 ADM
11 MAINTENANCE, SPARES, REPAIR AND SERVICING
The DSE71xx Series controller is designed to be Fit and Forget. As such, there are no user serviceable parts within the
controller.
In the case of malfunction, you should contact your original equipment supplier (OEM).
11.1 PURCHASING ADDITIONAL CONNECTOR PLUGS FROM DSE
If you require additional plugs from DSE, please contact our Sales department using the part numbers below.
11.1.1 DSE7110
7110 terminal designation Plug description Part No.
1-11 11 way 5.08mm 007-451
15-18 4 way 5.08mm 007-444
22-27 6 way 5.08mm 007-446
39-46 8 way 7.62mm 007-454
51-55 5 way 5.08mm 007-445
60-63 4 way 5.08mm 007-444
NOTE:- Terminals 12-14 are not fitted to DSE7110 controller.
NOTE:- Terminals 19-21 are not fitted to DSE7110 controller.
NOTE:- Terminals 28-38 are not fitted to DSE7110 controller.
NOTE:- Terminals 66-69 are not fitted to DSE7110 controller.