Winco DSE71xx Series User Manual

Page 21

DSE Model 71xx Series Control & Instrumentation System Mk2 Operators Manual

Part No. 057-113 71xx Series OPERATING MANUAL ISSUE 2 12/08/2010 ADM

5.2

GRAPHICAL DISPLAY

•

3 line Graphic Display with LED Backlight

•

Icon and numeric display.

•

Software controlled contrast

•

Mimic of 4 x indicators via LCD

5.3

VIEWING THE INSTRUMENTS

At power up, the display will show the software version and then show the default screen, which will display
Generator Voltage.
It is possible to scroll to display the different pages of information by repeatedly operating the next / previous page

button

Example

Instruments

Event log

A Further press of the scroll right button, returns
the display to the Instruments page.

The complete order and contents of each information page are given in the following sections

Once selected the page will remain on the LCD display until the user selects a different page, or after an extended
period of inactivity (LCD Page Timer), the module will revert to the status display.

Metering:

Generator Voltage, 3-phase, L-L and L-N

Generator Frequency
Generator Current
Engine Speed (RPM)
Mains Voltage, 3-phase, L-L and L-N (Model 7120 only)

Engine hours Run

Battery voltage

Oil Pressure Gauge

Engine Temperature Gauge
Fuel Level
Scheduler

NOTE:- Not all metering is available on all controllers. This is dependant upon configuration of the

system and the controller. You are referred to your configuration source and system supplier for further
information.