Winco DSE71xx Series - Manual (Page 22)

DSE Model 71xx Series Control & Instrumentation System Mk2 Operators Manual
22 Part No. 057-113 71xx Series OPERATING MANUAL ISSUE 2 12/08/2010 ADM
5.4 EVENT LOG
The info button toggles between the display of the instrumentation and the event log. Pressing the down button will
move to the previous event, the event log entry at position 1 being the most recent. On moving from the instrumentation to the
event log the unit will display the most recent entry.
A number in the bottom left indicates the event log entry currently displayed. There are five event log entries in the 71xx units.
When the event log is displayed the icon in the alarm icon area indicates the alarm type at that position of the event log. The
hours run at the time of the alarm shows in the instrumentation area. The bottom right icon indicates the current mode as
normal.
Example of Auxiliary Input Shutdown Alarm.
Event Log icon
Event number 1
Auxiliary input A
is logged
Number of engine running hours when
the event was logged (99hrs 9mins)