Viconics VT8300 Low Voltage User Interface Guide - Manual (Page 38)

38
Viconics Technologies Inc. | 9245 Langelier Blvd. | St.-Leonard | Quebec | Canada | H1P 3K9 | Tel: (514) 321-5660 | Fax: (514) 321-4150
028-0427-01 www.viconics.com | [email protected] November 2014
©
2
01
4 V
ic
onic
s T
ec
hno
lo
gi
es
Inc
. A
ll r
ig
ht
s r
ese
rv
ed
.
VT8300 Series User Interface Guide
Language
Night backLight
Units
Low backLight
English
5%
°C
60%
RH display Disabled
2/2 Display
DISPLAY SETTINGS 2/2
Parameter only displayed on
models with built in humidity
sensor.
SETPOINT PARAMETER DETAILS
Configuration Parameters Default Value Significance and Adjustments
Language
Default value: English Language
Select language for main display.
Choices: English, French, Spanish, Chinese, and Russian
°C or °F
Default value: °C Temperature Units
Sets default local scale value when Terminal Equipment Controller pow-
ers up.
°C for Celsius.
°F for Fahrenheit.
Low backlight
Default value: 60% Backlight Display
Set display backlight intensity after 2 minutes of keyboard inactivity.
Adjustable: 0 to 100%.
Night backlight
Default value: 5% Night Backlight Display
Set display backlight intensity after 2 minutes of keyboard inactivity.
Adjustable: 0 to 100%.
Parameter only available for models with motion/light detectors. The
screen backlight progressively decreases down to this setting when
room is dark. This feature is used mostly in hospitality applications when
a darker non obtrusive lighting level is desired when room is dark.
RH display
Default value: Disabled Relative Humidity Display
Enables display of humidity below room temperature on the display
(On): Display %RH.
(Off): Do not display %RH.
*(models with humidity sensor only)