Viconics VT8300 Low Voltage User Interface Guide - Manual (Page 29)

29 VT8300 Series User Interface Guide
Viconics Technologies Inc. | 9245 Langelier Blvd. | St.-Leonard | Quebec | Canada | H1P 3K9 | Tel: (514) 321-5660 | Fax: (514) 321-4150
028-0427-01 www.viconics.com | [email protected] November 2014
©
2
01
4 V
ic
onic
s T
ec
hno
lo
gi
es
Inc
. A
ll r
ig
ht
s r
ese
rv
ed
.
User Password
1. User password prompt shows only if password value is greater than 0000. A password value of 0000 disables user password but
does not restrict access to local user functions.
2. User password prompt automatically disappears after 10 seconds if no value is entered.
3. User is permitted access to controller interface to change any allowed settings when correct password is entered.
4. Password lock resumes after 1 minute of non activity.
PASSWORD PARAMETER DETAILS
Configuration Parameters Default Value Significance and Adjustments
Main password
Default value: 0 Installers Password
Parameter sets a protective access password to prevent unauthorized
access to the configuration menu parameters. A default value of 0 does
not prompt a password or lock access to configuration menu.
Range: 0 to 9999.
User password
Default value: 0 Are You Sure
Parameter sets a protective access password to prevent User
unauthorized access to main screen adjustments. A default value of 0
does not prompt for a password.
Range: 0 to 9999.
User Password
. . . .
0 1 2 3 4
5 6 7 8 9
Wrong code