Viconics VT7000 Series Installation Guide - Manual

1
Installation Guide for the VI-PIR Cover Accessory
For VT7xxxXx000(X) Series thermostats
( Issue Date: December 1, 2008 – 028-0184 R1 )
PRODUCT OVERVIEW
The VI-PIR Accessory covers with embedded Passive Infra-Red motion detector have been specifically designed to work with all
compatible VT7000 series thermostats. Thermostats compatible with VI-PIR covers use the following part number assignments:
VT7xxxxX5x00(X). The 5 identifies the thermostat base thermostat has the necessary onboard polarized PIR connector and
functionality added.
When equipped with a VI-PIR accessory cover, a VT7000 series thermostat provides advanced active occupancy logic, which will
automatically switches occupancy levels from Occupied to Stand-By and Unoccupied as required by local activity being present or
not. This advanced occupancy functionality provides advantageous energy savings during occupied hours without sacrificing
occupant comfort.
Additional documentation is available on
www.viconics.com
MODELS AVAILABLE
Viconics PIR Cover Part
Number
Description
Compatible with the
Following Thermostats
COV-PIR-FCU-C-5000 PIR cover with Commercial FCU interface VT73x0X5x00(X)
COV-PIR-FCU-L-5000 PIR cover with Hotel/Lodging interface VT73x5X5x00(X)
COV-PIR-RTU-5000 PIR cover for roof-top thermostats VT76xxX5x00(X)
COV-PIR-ZN-5000 PIR cover for zoning thermostats VT7200X5x00(X)
TYPICAL DETECTION PATTERN FOR VI-PIR LENS
12/01/08 028-0184
R1
PIR Cover Installation-E00.doc
www.viconics.com
[email protected]
COV-PIR-FCU-L-5000 COV-PIR-FCU-C-5000 COV-PIR-ZN-5000 COV-PIR-RTU-5000
Horizontal Angle
(typical)
Vertical Angle
(typical)