Vt8300 series user interface guide – Viconics VT8300 Low Voltage User Interface Guide User Manual
Page 26
26
Viconics Technologies Inc.
|
9245 Langelier Blvd.
|
St.-Leonard
|
Quebec
|
Canada
|
H1P 3K9
|
Tel: (514) 321-5660
|
Fax: (514) 321-4150
028-0427-01
www.viconics.com
|
November 2014
©
2
01
4 V
ic
onic
s T
ec
hno
lo
gi
es
Inc
. A
ll r
ig
ht
s r
ese
rv
ed
.
VT8300 Series
User Interface Guide
6/7 Configuration
Calib. temp.
User password
Main password
0.0 C
0
0
Calib. humid.
0% RH
Schedule menu
Enabled
CONFIGURATION PARAMETERS SCREEN 6/7
PARAMETER DETAILS SCREEN 6/7
Configuration Parameters Default Value
Significance and Adjustments
Main password
Default value: 0
Main Password
Installer password. This parameter sets a protective access
password to prevent unauthorized access to configuration menu param-
eters.
Default value of 0 does not prompt a password or lock access
configuration menu.
Range: 0 - 9999.
User Password
Default value: 0
User Password
User password. This parameter sets a protective access password to
prevent user unauthorized access to main screen adjustments.
Default value of 0 does not prompt a password.
Range: 0 - 9999.
Calib. temp.
Default value = 0.0 °C or °F
Calibration Temperature
Room temperature sensor calibration. Offset can be added or
subtracted to actual displayed room temperature.
Range: ± 2.5 °C, 0.5 °C increments ( ± 5.0 °F, 1.0 °F increments ).
Calib. humid.
Default value = 0% RH
Humidity Calibration
Humidity sensor calibration. Offset can be added or subtracted to actual
displayed humidity.
Range: ± 15.0 %RH (models with humidity sensor only).
Parameter only displayed on
models with built in humidity
sensor.