Viconics VT8300 Low Voltage User Interface Guide - Manual (Page 17)

17 VT8300 Series User Interface Guide
Viconics Technologies Inc. | 9245 Langelier Blvd. | St.-Leonard | Quebec | Canada | H1P 3K9 | Tel: (514) 321-5660 | Fax: (514) 321-4150
028-0427-01 www.viconics.com | [email protected] November 2014
©
2
01
4 V
ic
onic
s T
ec
hno
lo
gi
es
Inc
. A
ll r
ig
ht
s r
ese
rv
ed
.
PARAMETER DETAILS SCREEN 1/7
Configuration Parameters Default Value Significance and Adjustments
UI 19
Universal input no.3 configuration
Default value = None Universal Input No. 3
None: no function associated with input though input can be used
for remote network monitoring.
COC/NH: change over dry contact. Normally heat used for hot/cold
water or air change over switching in 2 pipe systems.
COC/NC: change over dry contact. Normally cool used for hot/cold
water or air change over switching in 2 pipe systems.
COS: change over sensor. Used for hot/cold water or air change over
switching in 2 pipe systems.
Occupancy cmd
Default value = Local Occupancy Command
Loc Occ: occupancy is determined by local sequences.
Occupied: force occupied mode.
Unoccup: force unoccupied mode.