Top Flite TOPA0704 - Manual (Page 5)

5
highly recommended that you use only 30-minute
(or 45-minute) epoxy, because you will need the
working time and/or the additional strength.
● Photos and sketches are placed before the step
they refer to. Frequently you can study photos in
following steps to get another view of the same parts.
● The Corsair is factory-covered with Top Flite
MonoKote ® fi lm. Should repairs ever be required,
MonoKote can be patched with additional MonoKote
purchased separately. MonoKote is packaged in six-
foot rolls, but some hobby shops also sell it by the
foot. If only a small piece of MonoKote is needed
for a minor patch, perhaps a fellow modeler would
give you some. MonoKote is applied with a model
airplane covering iron, but in an emergency a regular
iron could be used. A roll of MonoKote includes full
instructions for application. Following are the colors
used on this model and order numbers for six foot rolls.
Flat Insignia Blue (TOPQ0507)
KIT INSPECTION
Before starting to build, take an inventory of this kit to
make sure it is complete, and inspect the parts to make
sure they are of acceptable quality. If any parts are
missing or are not of acceptable quality, or if you need
assistance with assembly, contact
Product Support .
When reporting defective or missing parts, use the part
names exactly as they are written in the Kit Contents list.
Top Flite Product Support
3002 N Apollo Drive, Suite 1
Champaign, IL 61822
Ph: (217) 398-8970, ext. 5 Fax: (217) 398-7721
E-mail: [email protected]
ORDERING REPLACEMENT PARTS
Replacement parts for the Top Flite Giant Scale Corsair
ARF are available using the order numbers in the
Replacement Parts List that follows. The fastest, most
economical service can be provided by your hobby
dealer or mail-order company.
To locate a hobby dealer, visit the Top Flite web
site at www.top-fl ite.com. Select “Where to Buy” in
the menu across the top of the page and follow the
instructions provided to locate a U.S., Canadian or
International dealer.
Parts may also be ordered directly from Hobby Services
by calling (217) 398-0007, or via facsimile at (217) 398-
7721, but full retail prices and shipping and handling
charges will apply. Illinois and Nevada residents will also
be charged sales tax. If ordering via fax, include a Visa
®
or MasterCard ® number and expiration date for payment.
Mail parts orders Hobby Services
and payments by 3002 N Apollo Drive, Suite 1
personal check to: Champaign IL 61822
Be certain to specify the order number exactly as listed
in the
Replacement Parts List . Payment by credit card
or personal check only; no C.O.D.
If additional assistance is required for any reason
contact
Product Support
by e-mail at or by telephone at
productsupport@top-fl ite.com (217) 398-8970
Order No. Description
REPLACEMENT PARTS LIST
Wing Kit
Fuse Kit
Tail Set
Cowl
Canopy
Spinner
Cockpit kit
Landing gear covers
Tail cover
Dummy engine
Decal Sheet
Fiberglass parts set
TOPA1850
TOPA1851
TOPA1852
TOPA1853
TOPA1854
TOPA1855
TOPA1856
TOPA1857
TOPA1858
TOPA1859
TOPA1860
TOPA1861