Output tab – TC-Helicon VoiceLive 3 - Reference Manual User Manual
Page 96
VoiceLive 3 – Reference manual (2014-03-29) 94
Output tab
Output Mode parameter
Use the Output Mode parameter to selects the
output mode for VoiceLive 3.
Parameter settings:
–
Stereo:
– The left XLR output jack carries the left ste-
reo channel.
– The right XLR output jack carries the right
stereo channel.
–
Mono:
– The left XLR output jack carries the summed
(with effects) mono vocal & guitar channel
signals.
– The right XLR output jack carries the
summed (without effects) mono vocal &
guitar channel signals.
– The dry channel includes Tone and Auto-
Chromatic Pitch Correction (if applicable).
– The dry channel does not contain HardTune
effect(s).
–
Dual Mono:
– The left XLR output jack carries the summed
(with effects) mono vocal channel.
– The right XLR output jack carries the
summed (with effects) mono guitar channel.
XLR Out Level parameter
Use the XLR Out Level parameter to set the rela-
tive level of the signal going to the XLR outputs.
Parameter settings:
–
Mic Level:
Typically the best setting when
connecting to a mixer/PA. This level closely
replicates that of a microphone going directly
into the mixer.
–
Line Level:
When connecting to a mixer/PA
line inputs, this setting is a good choice.
Links:
– For a tutorial on PA basics, Yorkville has an
extremely useful “PA Primer” guide (PDF):
– There is also a great Craig’s Corner video epi-
sode covering Mixer Setup with TC-Helicon
devices:
– And another with tips on eliminating feedback: