TC-Helicon VoiceLive 3 - Reference Manual User Manual

Page 27

VoiceLive 3 overview

VoiceLive 3 – Reference manual (2014-03-29) 25

Stereo PA connection for vocals (and guitar if applicable)

This diagram shows a “Stereo” output mode.
Stereo sends a Left and Right signal via the XLR
outputs to your PA or mixer.

This allows you to enjoy the full benefits of stereo
audio effects.

Setting Output Mode to Stereo

Changing VoiceLive 3 from Mono
(default) to Stereo output:
– Press Setup.
– Use the < or > Arrow buttons to move to the

Output page.

– Use the Control Knob to move the selection

bar until Output Mode is highlighted (white).

– Turn the Mix Knob directly below the Out-

put Mode box on the screen until the mode
changes to Stereo.

– Press Home to exit.
– When choosing Stereo, ensure the PA is ac-

tually outputting a stereo signal. It’s common
for a PA to have 2 speakers but still be mono.