TC-Helicon VoiceLive 3 - Reference Manual - Manual (Page 103)

Setup
VoiceLive 3 – Reference manual (2014-03-29) 101
Sysex ID parameter
Use the SysEx ID parameter to set the Sysex ID
that is used for addressing devices.
! If you are using VoiceSupport for firmware up-
dates and/or Preset management, you need to
set the SysEx ID to 0.
SysEx Dump Rate parameter
Use the SysEx Dump Rate parameter to set the
“speed” of MIDI data transfers for firmware up-
dates and Preset management.
Parameter settings:
– Normal: The default value. It is advised to
keep this setting unless you are encountering
problems.
– Slow: Reduces the data transfer rate. If you
are having trouble with failed Preset syncing
or firmware updates using VoiceSupport soft-
ware, try this setting.