TC-Helicon VoiceLive 3 - Reference Manual User Manual
Page 116
VoiceLive 3 – Reference manual (2014-03-29) 114
Exp(ression) Min(imum)
Pos(ition) parameter
If you have connected a second expression ped-
al to the Footswitch jack, use the Exp(ression)
Min(imum) Pos(ition) parameter in the Setup
menu to define the parameter value that should
be associated with the minimum (down) position
of this second expression pedal.
For more information, see “Exp. Pedal tab: Get-
ting the most out of your expression pedal”.
Exp(ression) Max(imum)
Pos(ition) parameter
If you have connected a second expression ped-
al to the Footswitch jack, use the Exp(ression)
Max(imum) Pos(ition) parameter in the Setup
menu to define the parameter value that should
be associated with the maximum (up) position of
this second expression pedal.
For more information, see “Exp. Pedal tab: Get-
ting the most out of your expression pedal”.
SW3-1 / SW3-2 / SW3-3 parameters
These parameters are only available when the
Footswitch jack parameter has been set to
Switch-3.
Each Switch-3 footswitch can be assigned to
one of the following controls:
– Step
– Pitch Corr(ection)
– All Mute (Guitar and Vocal mute)
– µMod
– Delay
– Reverb
– Vocal HIT
– Double
– Harmony
– Transducer
– HardTune
– Rhythmic
– Stutter
– Choir
– Synth
– Harm(ony) Hold*
– Set Key
– Tap Tempo
– Bypass
– G µMod
– G Delay
– G Reverb
– G HIT
– G Comp
– G Drive
– G Amp
– G Rhythm
– G Octaver
– G Wah