TC-Helicon VoiceLive 3 - Reference Manual - Manual (Page 100)

Setup
VoiceLive 3 – Reference manual (2014-03-29) 98
MIDI tab
Source parameter
Use the Source parameter to determines which
MIDI input VoiceLive 3 should use.
Parameter settings:
– USB: VoiceLive 3 receives MIDI information
from the USB port.
– MIDI: VoiceLive 3 receives MIDI information
from the hardware MIDI IN port.
Filter parameter
Use the Filter parameter to filter out specific MIDI
information from the incoming MIDI data stream.
This is helpful if you would like VoiceLive 3 to re-
spond to certain types of information – like pro-
gram changes – but not others, such as Continu-
ous Controller (CC) messages. The parameter
setting you choose here tells VoiceLive 3 what
NOT to respond to.
Parameter settings:
– None: All incoming MIDI data is responded to,
if applicable.
– PrgChange: All incoming Program Change
messages are rejected.
– SysEx: Any incoming System Exclusive (Sy-
sEx) data is rejected.
– PC + SysEx: All incoming Program Change
messages and SysEx data are rejected.
MIDI Channel parameter
Use the MIDI Channel parameter to set the MIDI
Channel that VoiceLive 3 “listens to” for incom-
ing MIDI information. This parameter is useful if
you have multiple MIDI devices and want to send
specific commands to individual devices.