Juniper Systems Juniper Aspect User Manual

Page 20

Juniper Aspect Owner’s Manual

communication and charging purposes. Refer to manual

for the dock or the mobile computer for details. Manuals

are available on our website at

Establishing Communication Between a Desktop

Computer and a Mobile Computer

Before you can download the mobile version of Juniper

Aspect to a mobile computer, you need to establish

communication between the desktop computer and the

mobile computer.
1. Plug the AC wall power charger into a wall socket.

Plug the other end into the DC power jack on the

mobile computer (or dock).

2. Plug the USB cable Client end (mini B) into the mobile

computer (or dock). Plug the USB cable Host end (full

size A) into your desktop computer.

3. The synchronization software you downloaded

while installing the desktop software automatically

opens. A setup wizard asks you if you want to set up

a partnership. This happens each time you establish

communication between a desktop and mobile

computer. You can configure a partnership between

the desktop PC and a mobile computer by following

the instructions on the screen, however a partnership

is not required to run Juniper Aspect. For ActiveSync,

select Next to set up a partnership or Cancel. For

Windows Mobile Device Center, select Set up Your

Device or Connect Without Setting up Your Device.

Note: The names and features of Microsoft’s software

can change over time. These instructions might vary

somewhat from what you see.

For more information on setting up communication, refer

to the Owner’s Manual for your mobile computer.