Juniper Systems Juniper Aspect - Manual (Page 12)

8
Juniper Aspect Owner’s Manual
map. When the data from each mobile computer is
uploaded to the desktop computer, it is combined
and synchronized under a single project name.
5. Synchronizing data: You need to determine how often
you want data synchronized between the mobile
computer(s) and the desktop computer. This could
be several times a day or less often depending on the
scope of the project.
Setting up Projects
Projects are typically set up by the project manager on
the desktop computer and loaded onto one or more
mobile computers.
1. Set up communication between the desktop
computer and mobile computer.
2. Load the Juniper Aspect software onto the desktop
computer.
3. Select which object database you want to use, edit if
necessary.
4. Open up a new project.
5. Find the location of the current project on the map.
Add object information if desired.
6. Load the mobile software, object database, and
basemap onto a mobile computer.
7. Train the mobile worker(s) on how the software works,
how you want them to collect data for the project,
when you want them to synchronize data, etc.
Collecting Data on the Mobile Computer
Information is collected in the field by the mobile
worker(s) and loaded onto the desktop computer.
1. If applicable, get basic training on the project from
the project manager.