Juniper Systems Juniper Aspect - Manual (Page 130)

126
Juniper Aspect Owner’s Manual
If you forget to click off, the edits won’t remain and you’ll
have to do them again.
Save frequently. Before stopping the edit session, save
your edits.
Maintenance Tips for the Mobile Computer
Cleaning the Touchscreen
Water or dirt won’t hurt your Archer or Mesa mobile
computer, but if you try to wipe off the screen while it’s
active, you may accidentally make changes on the
screen. Disable the touchscreen temporarily by holding
down the Power button on the mobile computer until the
menu appears. Select Disable TS from the list. Clean the
screen. When you are done, hold down the Power button
again and select Enable TS from the menu.
For the Mesa, you can press and hold the screen rotation
button for a couple of seconds until the touch screen is
disabled. Once you have cleaned the screen, do the
same thing to enable the screen.
Suspend, Reset, or Turn Off the Mobile Computer
These functions are important to understand:
„
To suspend, press the Power button once. To resume,
press the Power button again. Suspending the mobile
computer puts it in a low power state to where it can
be easily resumed (turned back on). Suspend the
mobile computer when you will be using it daily.
„
To reset, either hold the Power button down until a
power menu appears and tap on Reset or hold the
Power button down for 5 to 7 seconds. Resetting the
mobile computer frees up any unavailable memory
or COM ports. Also, if the mobile computer ever gets
locked up, try resetting it.
„
To turn off the mobile computer, hold the Power button
down until the menu appears and tap on Power Off.
This is only available when battery power is being
used (not plugged into the wall). Turn off the handheld
when it won’t be used for a couple of days or more.